• C-Channel

    C-Channel is a type of (usually structural steel) beam, used primarily in building construction and civil engineering. It’s a cross section consists of wide “web”, usually but not always oriented vertically, and two “Flanges” at the top and bottom of the web, only sticking out on one side of the web, often used where the flat, back side of the web can be mounted to another flat surface for maximum contact area. They are also sometimes welded together back-to-back to form a non-standard I-beam.

    Usual Structure: Primary structure for Ceiling Channel System, also used for Wall Framing & Partitions Material: Galvanized Steel

    THICKNESS

    0.70MM 0.80MM

    SIZES

    12MM X 38MM X 5.0M 12MM X 38MM X 5.0M

    LENGTHENER

    Steel, Strong, Light and it doesn’t rust We cut to size to your requirement

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • C-Purlins

    C Purlins are a component of the metal ceiling framework that sustain the weight of the gypsum or acoustic board by serving as either a wall angle or metal furring.

    Usual Structure: Broadly used for Trusses & Roofing construction Material: Galvanized Steel

    THICKNESS

    0.80 MM 1.0 MM 1.2 MM

    SIZES

    2”X 3” X 6.0M 2”X 4” X 6.0M

    LENGTHENER

    Up To Transportable Length

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • Metal Furring

    Metal furring refers to a non-structural metal attachment that is used to hold a finish material. In metal-farmed construction, the furring pieces are long, light gauge materials of various shapes.

    Usual Structure: A support structure for ceiling system, usually partnered with c-channel, also used for Wall Framing partitions. Material: Galvanized Steel Thickness: - 0.40MM X 19MM X 50MM X 5.0M - 0.30MM X 19MM X 50MM X 5.0M

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • Metal Studs

    Metal Studs is used is most office and commercial construction, and it has several advantages over wood. Steel studs are perfectly straight, and they don’t’ shrink, split, or mold.

    Usual Structure: Wall Framing and Partitions, and other types of framing Material: Galvanized Steel Thickness: - 0.50MM X 35MM X 76MM X 3.0M - 0.60MM X 35MM X 76MM X 3.0M

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • Steel Deck

    Steel Deck is a sheet of high-performance galvanised steel used in the construction of composite concrete floor slabs. It can also be used as a structural feature in roof construction.

    Usual Structure: Used as Flooring material for multi-story building Type Of Base Metal: Cold Rold Sheets Base Metal Thickness: - 0.80MM - 0.90MM - 1.00MM - 1.2MM Minimum Yeild Of Point Of Base Material: 80,000 PSI (340 MPA) Effective Width: .27M

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • T-Runners

    Another type of ceiling suspension which makes use of boards with maximum dimension of 2’x4’. The boards are placed on the runners without the use of screws or any fasteners.

    Application: Usually used for accoustic ceiling. Usual Structure: Used for Ceiling support system Material: Galvanized Steel Specification: MAIN TEE: - 1” X 1” X 1’ CROSS TEE: - 1” X 1” X 2’ / 1” X 1” X 4’ CROSS TEE: - 1” X 1” X 10’ / 1” X 1” X 12’

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068
  • Wall Angle

    Wall angle is the perimeter metal furring in a drop or gypsum or acoustic ceiling grid installation. It is used at the wall slab cornering for the metal furring to hold into. Wall angles are fixed to the wall which makes them great for holding other metal frameworks in-ceiling installation

    Usual Structure: Ceiling framing structure and dry wall partitions. Material: Galvanized Steel

    THICKNESS

    1” X 1” X 10’ 1” X 1” X 12’ 0.40MM X 25MM X 2.44M

    FEATURES

    Superior Corrosion, Durability, High Strength Steel Heat Resistance, Hard Paint Film, Excellence Paint adhesion Extensive color range, versatile product, cost effective solution

    Main Features

    • Location: All Oliver Doors Branches
    • Contact Dealer via Phone: +639-17-126-6068